U0304Software Incompatibility With Gear Shift Control Module
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Vad koden betyder
Texten från felkodsdatabasen är på engelska tills vår svenska översättning är klar. Bedömningen av hur akut felet är har vi skrivit på svenska.
U0304 is stored when a control unit, usually the transmission controller, finds that the software or calibration identity of the gear shift control module does not match what it expects. GM's generic U03xx procedure (Saab 9-5, 2011) treats such codes as configuration faults: checked at 9-16 V with normal bus traffic, no circuit test, cured by setup or programming. Allison uses U0304 for its 6th-generation controls as Gear Shift Module 1 Incompatible: a 6th-generation push-button selector does not work with a 5th-generation TCM, and the selector must match the TCM calibration; U0333 covers selector 2. U0103 means lost contact, U0404 invalid data from the same module. The driver may be unable to select a range.
Så läser du koden
- U
- Nätverk – kommunikationen mellan bilens styrenheter
- 0
- Generisk kod: betyder samma sak i alla bilar
- 304
- Felets nummer inom systemet
Troliga orsaker
- 1
Shift selector generation or type does not match the TCM calibration (e.g. after replacement)
Vanligast
- 2
Shift module or TCM replaced or flashed without setup
Vanlig
- 3
Software update aborted, wrong file loaded
Mindre vanlig
Vanliga symptom
- Gear ranges cannot be selected or the selector does not respond
- Transmission warning or code shown on the selector display
- Code appears right after a selector or TCM was replaced
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Lyser en röd varningslampa, eller märker du rök, brandlukt, kraftiga ljud eller att bromsarna eller styrningen känns annorlunda: stanna så snart det är säkert och kontakta oss.
Åtgärden: Kräver verkstadens specialutrustning.