P2088"A" Camshaft Position Actuator Control Circuit Low (Bank 1)
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Vad koden betyder
Texten från felkodsdatabasen är på engelska tills vår svenska översättning är klar. Bedömningen av hur akut felet är har vi skrivit på svenska.
P2088 concerns the control line of the oil control valve that moves the intake cam phaser (actuator A) on bank 1. On GM engines the ECM feeds the solenoid through a high-side driver; while the output is switched on, a voltage that falls below the controller window means the line has a path to ground (equivalent to less than 0.5 ohms). GM samples every 250 ms and sets the code after 20 failures in 25 samples, as a Type B fault on the 5.3 L L84 (19OBDG03B). GM bulletins PIP5553 (2018) and PIP5724 (2020) link P2088 and P2089 on V8 and V6 trucks and the Camaro to a jumper harness chafed or pinched at connector X154 on the lower left of the front cover. On many Fords open and shorted phaser circuits all land in P0010. The phaser then stays locked in its rest position.
Så läser du koden
- P
- Drivlina – motor, växellåda och avgasrening
- 2
- Generisk kod: betyder samma sak i alla bilar
- 088
- Undersystem: bränsle- och luftmätning samt avgasrening, och felets nummer inom det
Troliga orsaker
- 1
Control wire chafed through to ground, e.g. GM jumper harness at connector X154
Vanligast
- 2
Oil control valve coil shorted internally
Vanlig
- 3
Engine oil wicked into the valve connector
Mindre vanlig
Fler möjliga orsaker (1)
Damaged output driver in the ECM
Mindre vanlig
Vanliga symptom
- Engine warning lamp on
- Less pull and higher consumption with cam timing fixed
- Rough idle on some engines
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Lyser en röd varningslampa, eller märker du rök, brandlukt, kraftiga ljud eller att bromsarna eller styrningen känns annorlunda: stanna så snart det är säkert och kontakta oss.
Åtgärden: Kräver felsökning med diagnosutrustning.