P0983Shift Solenoid D Control Circuit High
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Vad koden betyder
Texten från felkodsdatabasen är på engelska tills vår svenska översättning är klar. Bedömningen av hur akut felet är har vi skrivit på svenska.
High-voltage fault in the control circuit of shift solenoid D. Ford defines it narrowly as SSD short to power; the open circuit stays with P0765. On the 6R140 the solenoid outputs are run by a smart driver chip (ADLER) that does the open and short checks itself, while older units use a feedback line from the output stage; both need 0.5 to 5 s. Since SSD on Ford six-speeds controls the low/reverse clutch, either alone or through the multiplex valve, a constant power short can apply that clutch at the wrong time. The 2020–2023 gasoline summary keeps the same assignment. GM documents no P0983 for its geared automatics, and Ferrari uses it for an actuator 3 sensor reading too high. Ground faults are P0982.
Så läser du koden
- P
- Drivlina – motor, växellåda och avgasrening
- 0
- Generisk kod: betyder samma sak i alla bilar
- 983
- Undersystem: växellåda, och felets nummer inom det
Troliga orsaker
- 1
Solenoid D control wire shorted to a supply
Vanligast
- 2
Solenoid D with shorted windings
Vanlig
- 3
Conductive contamination between neighbouring pins
Vanlig
Fler möjliga orsaker (1)
Faulty smart driver or output stage in the module
Mindre vanlig
Vanliga symptom
- MIL on, default gear
- Clunk or tie-up feel if the low/reverse clutch applies unintentionally
- Upper gears blocked
Hur akut är det?
Boka snarast
Bilen kan gå i nödläge med begränsad effekt. Kör lugnt och kort sträcka, helst direkt till verkstaden.
Lyser en röd varningslampa, eller märker du rök, brandlukt, kraftiga ljud eller att bromsarna eller styrningen känns annorlunda: stanna så snart det är säkert och kontakta oss.
Åtgärden: Större arbete: kräver felsökning och ofta demontering.